|
OSMO Polyx Oil satin is a durable, low maintenance, satin, oil and wax finish for interior timber or cork flooring, as well as timber furniture including baby's cots, bassinets and playpens. Also suitable for exposed timber beams, sarking, paneling and timber benchtops. Suitable for a variety of timber types - both hardwood and softwood - such as Pine, Kauri, Oak, Eucalyptus, Teak, Jarrah and Douglas Fir (Oregon).
To understand how the OSMO system works, and to view a comparison chart between OSMO products and polyurethanes, please click here
For timbers which are oily by nature, such as some species of Eucalypt, Kwila/Merbau and Rosewood etc, it is recommended that the timber's surface be wiped over with a solvent such as citrus turpentine to remove any oil present, before applying the Polyx Oil satin.
To determine which OSMO product to use on your timber floor, click here
Polyx Oil satin is a satin floor finish based on natural oils and waxes, which penetrate deeply into the surface to enhance and maintain beauty and elasticity. As durable as polyurethane, and far easier to repair when scratched or worn down. Polyx Oil satin, once fully cured, will not crack, flake, peel, blister or water mark and is stain resistant against wine, beer, cola, coffee, tea, fruit juices, milk and water.
Easy to apply, with 2 thin coats being applied 12 - 24 hours apart. Sanding in between coats is generally not necessary. Excellent coverage rate of approximately 24 square metres per litre. The preferred method of application is by good quality bristle brush. OSMO's floor brush applicators are ideal. A low nap microfibre roller may also be used. Please read the data sheet for details.
Easy to maintain with any plant based soap such as OSMO's Wash and Care for damp mopping, and OSMO's Liquid Wax Cleaner for buffing the timber when needed.
Polyx Oil satin is available in 2 types - Normal or Rapid. Normal Polyx Oil would generally be used during the warmer summer months, and is dry in approximately 24 hours. The Rapid Polyx Oil should only be used in cold, winter conditions where there is snow or frost etc, or where - because of the cold, - curing time may be an issue. Generally, the Rapid Polyx Oil will cure faster, with 2 coats able to be applied on the same day. The finish for both products is identical.
To view the technical information sheet on this product, please click on the download button on this page.
Our preferred floor sander in Victoria is Ron Gould. If you would like him to provide a quote, please email him at: ron@oldfloorsanding.com.au
Our web site is secure! Buy Now Using Credit Card, Cheque
or phone your order to 03 9465 2864
|
Technical Specification
General Application Guide
|
You may also like:
|
facebook